Pairing Your Headset - I-Tech Clip IIIs User Manual

Page 8

Pairing Your Headset

1. Place the headset and the mobile handset where they are easily viewable by no
more than 1 meter apart.
2. Ensure the headset is OFF.
3. Press and hold the MFB until the headset LED alternately flashes blue and red.
4. Activate your mobile handset's Bluetooth function by referring to your mobile
handset user guide for details.
5. Set the mobile handset to search for Bluetooth devices within about 1 meter as
instructed in the mobile handset user guide and select "i.Tech Clip IIIs" from the
list.
6. Enter the preprogrammed passkey "8888" and press "OK" to pair your headset
and mobile handset. When the pairing is complete, the headset LED will flash
blue rapidly for 5 times followed by a long beep.
7. Go back to your mobile handset's main menu. For certain mobile handset models,
a headset icon will be shown on the screen. You should now be able to make and
receive calls using your headset.
IMPORTANT If the pairing cannot be completed within 2 minutes while the
pairing mode is activated, the headset LED flashes purple red with 3 beeps and
the headset is turned off. Please repeat Steps 2 to 7 to pair the headset and the
mobile handset again.