Table of Contents
Advertisement
Page 15
Troubleshooting
If you are unable to connect your headset and mobile handset, please try the
following:
Ensure your headset is turned off and is properly charged.
Ensure the headset is paired with your mobile handset.
Ensure your mobile handset's Bluetooth feature is activated. Please refer to your
mobile handset user guide for specific instruction.
Ensure the headset is within a maximum of 10 meters of your mobile handset(s)
and there are no obstructions, such as walls or other electronic devices in
between.
If the above steps do not solve your problem, please recharge the headset and remove
your mobile handset battery for a while.
If there is no reaction when pressing the buttons, press the Reset Key (fig.1) to return
to factory default setting. The headset is turned on again and all pairings are cleared.
The i.Tech Clip IIIs Headset is compliant with and adopts the Bluetooth Specification
1.2. However, interoperability between the device and other Bluetooth-enabled
products is not guaranteed because it depends on compatibility. For more information
on the compatibility between the device with other Bluetooth-enabled products,
please check with the manufacturer or browse
http://www.itechdynamic.com
Advertisement
Table of Contents
