Advertisement
Quick Links
Advertisement
Related Manuals for I-Tech MyVoice 610
Summary of Contents for I-Tech MyVoice 610
- Page 1 MyVoice 610 Bluetooth Headset User Guide Paring Mode (Off Mode): Holde 8 sec. Pairing Mode...
- Page 2 Hold the volume up/ down and see the status indicator to check the battery status. Solid Green = Over 3.5 Hours Talk Time Flashing Green = Below 3.5 Hours Talk Time Flashing Red = Below 45 Minutes Talk Time...
- Page 3 1. Multi-function Button (MFB) • Power On / Off • Pair with mobile phone • Answer / End a call • Call waiting 2. Status Indicator 3. Micro-USB Charging Socket 4. Built-in Microphone...
-
Page 4: Low Battery
3) Activate your mobile phone’s Bluetooth, search Bluetooth devices, select “MyVoice 610” and enter the passcode “0000”. When the pairing is completed, the headset’s status indicator will flash blue rapidly 5 times and you can hear a long beep. -
Page 5: Power Off
MFB for 3 seconds times When you turn on your headset for the first time, the headset proceeds into pairing mode, i.e. the status indicator flashes blue and red alternately, so that you can immediately pair it with your mobile phone. POWER OFF Press and hold the Long beep... - Page 6 Product Specifications Bluetooth Specification: v2.1 + EDR Class 2 Bluetooth Profiles Supported: Headset, Handsfree Range of Frequency: 2.4GHz spectrum Nominal Charging Time: Within 3 hours Talk Time*: Up to 5 hours Standby Time*: Up to 130 hours Dimensions: 52 (L) x 17 (W) x 5.5 (H) mm / 2.0 (L) x 0.67 (W) x 0.22 (H) inches Weight: 12 grams / 0.42 ounces * may vary due to the user’s habit, different modes of operation, and mobile phone...
- Page 7 double click MFB Call Transfer Press and hold the (headset to mobile VOL UP for 2 phone)* seconds Call Transfer Press MFB once (mobile phone to headset)* Call Waiting allows you to hold up the current caller and pick up the second caller. To pick second call, press MFB once.