Table of Contents
Advertisement
Page 11
Adjusting the Volume
Press the Volume Key repeatedly until you reach the desired volume level.
Resetting / Removing the Pairing
You may want to reset the headset to its original settings. This also clears all current
pairings.
1. Ensure the headset is OFF.
2. Press and hold the Volume Key until the LED alternately flashes blue and red
rapidly.
3. Release the Volume Key.
4. Press and hold the Volume Key again until you hear 2 beeps.
5. Recharge the headset for a few seconds
The headset is turned off and returns to the original settings. All current pairings are
cleared.
Advertisement
Table of Contents
Need help?
Do you have a question about the Clip IIIs and is the answer not in the manual?