Alienware AW558 User Manual page 17

Problems
How to connect a
wired mouse to your
computer
Resolving cursor
issues
Possible solutions
1. Look for the connector at the end of
the USB mouse cable.
2. Look for a S port on your
computer.
1. Reseat the wired USB mouse cable into
the USB port.
2.
Make sure the optical opening at the
bottom of the mouse is clean.
3.
Make sure the surface you are using has
enough of a pattern in it that the mouse
can tell when it has been moved (a
mouse pad is best, since the mouse
udges movement by re ections, a
4. Try the wired USB mouse in another
USB port on the computer. A notice
that drivers are being installed may
appear; if so, wait until a message that
the drivers were installed before you
use the mouse.
5. Try another wired USB mouse, when
available. A notice that drivers are
being installed may appear, if so, wait
until a message that the drivers were
installed before you use the mouse.
6.
Save any data, close any open
program(s) and restart the computer.
When you do not have another mouse
or touchscreen, you may have to hold
the power button down for at least 15
seconds to turn the computer o and
you will lose any data not saved.
│ 17