GE Digital Energy Multilin 239 Instruction Manual page 23

CHAPTER 2: INSTALLATION
1 2
GE Power Management
MAXIMUM CONTACT RATING
MAXIMUM CONTACT RATING
250 VAC 10A RESISTIVE
250 VAC 10A RESISTIVE
1/4HP 125VAC 1/2HP 250VAC
1/4 HP 125VAC 1/2HP 250VAC
®
MADE IN CANADA NRTL
MANUAL PART
239 MOTOR PROTECTION RELAY – INSTRUCTION MANUAL
Courtesy of NationalSwitchgear.com
The information included on the product label is explained below:
3 4 5
MODEL
239-RTD-AN
SUPPLY VOLTAGE
SUPPLY VOLTAGE
TAG# 1234-567-89
TAG#
1. MODEL NO: The model number shows the configuration of the relay. The model
number for a basic unit is 239. RTD and AN will appear in the model number only if the
RTD option or Analog Output option is installed. H will appear in the model number if
conformal coating is required.
2. SUPPLY VOLTAGE: Indicates the 239 power supply input configuration. The 239 shown
above can accept any AC 50/60Hz voltage from 70 to 265 V AC or DC voltage from 90
to 300 V DC.
3. TAG#: This is an optional identification number specified by the customer.
4. MOD#s: These are used if unique features have been installed for special customer
orders. These numbers should be available when contacting GE Multilin for technical
support. Up to five MOD#s can be installed into the 239.
5. SERIAL NO: Indicates the serial number for the 239 in numeric and barcode format.
The following table shows the revision history of the 239. Each revision of the instruction
manual corresponds to a particular firmware revision in the 239. The instruction manual
revision is located on the first page of the manual as part of the manual P/N (1601-00XX-
Revision). The 239 firmware revision is loaded in the relay and can be found by scrolling to
the display message
.
VER
When using the manual to determine relay features and settings, ensure that the revision
corresponds to the 239 firmware revision using the table below. For a large instruction
manual (8.5" × 11") the part number is 1601-0067; for a small instruction manual (5.5" ×
7.25") it is 1601-0060.
Table 2–1: Firmware/manual Revisions Table
FIRMWARE
NO. VERSION
1601-00XX-C6
1601-00XX-C7
1601-00XX-C8
1601-00XX-D1
1601-00XX-D2
6 7 8
FIRMWARE
90-300VDC 20VA
SERIAL NO.:
70-265VAC 50/60HZ 20VA
MOD#s NONE
MOD#
FIGURE 2–2: 239 Product Label (Example)
A3: PRODUCT INFO\FIRMWARE VERSIONS\MAIN PROGRAM
MANUAL PART
2.10 1601-00XX-D5
2.11 1601-00XX-D6
2.12 1601-00XX-D7
2.20 1601-00XX-D8
2.30 1601-00XX-D9
9 10 11
64D240C4.000
110.000
D6401234
819790AH-X4.CDR
FIRMWARE
NO. VERSION
2.40
2.50
2.51
2.51
2.6x
12
2–17