GE Digital Energy Multilin 239 Instruction Manual page 118

6–80
Courtesy of NationalSwitchgear.com
 Clicking the arrow at the end of the box displays a numerical keypad
interface that allows the user to enter a value within the setpoint
range displayed near the top of the keypad:
 Click Accept to exit from the keypad and keep the new value.
 Click on Cancel to exit from the keypad and retain the old value.
 For setpoints requiring non-numerical pre-set values (e.g.
above), clicking anywhere within the setpoint value box
CT TYPE
displays a drop-down selection menu arrow. Select the desired value
from this list.
 For setpoints requiring an alphanumeric text string (e.g. message
scratchpad messages), the value may be entered directly within the
setpoint value box.
 Click on Save to save the values into the 239.
 Click OK to accept any changes and exit the window.
 Otherwise, click Restore to retain previous values and exit.
239 MOTOR PROTECTION RELAY – INSTRUCTION MANUAL
CHAPTER 6: User Interface
GROUND