Commands; Links; Power - A-Neu Video HD-88 Series Instruction Manual

Note: not all commands are supported on all devices.
Item Command
1
2
3
4
5
6
7
8
9
10
1. LINK
Function
Leave
Link
Check Link Condition

2. POWER

Function
Power OFF
Power ON
Check the Status of
Condition

COMMANDS

Description
Link Establish or disable data link between controller and device.
Power Set/Check the status of Power
Output[dd] Set/Check the state of single outputs
ActiveSource Check the status of an Input for a signal present
OutputAll Set/Check the state of all outputs
Memory Save the current matrix confi guration to memory
Recall Recall a saved matrix confi guration from memory
Recall[mm] Check the data of memory address
Lock Set/Check the status of Lock
EDID Set/Check EDID (HDMI only)
Command
Link 00;
Link 01;
Link ?;
Command
Power 00;
Power 01;
Power ?;
Response Description
HD-88 00; Leave
HD-88 01; UN-KNOW Command
HD-88 00; Link
HD-88 01; UN-KNOW Command
Link 00; System Leave
Link 01; System Link
Response Description
HD-88 00; Power OFF
HD-88 01; UN-KNOW Command
HD-88 00; Power ON
HD-88 01; UN-KNOW Command
Power 00; Power OFF
Power 01; Power ON
4