Sling Media Slingcatcher User Manual page 9

STEP 7 : TURN ON yOUR TV
Wait 1 minute for SlingCatcher and your TV to warm up. If necessary, change
your TV video input source setting to match the input that you've connected
SlingCatcher to.
It may not be obvious how to change the input source setting on your TV. Again,
you may need to refer to the manual for your TV for information. If you don't have
the manual, many manufacturers also have these manuals on their web sites.
After you choose the correct input source setting, a Welcome screen appears.
Onscreen instructions will lead you through the step-by-step process for
configuring your SlingCatcher.
IF YOU DO NOT SEE THE WELCOME SCREEN AT THIS POINT :
First, wait at least an additional 30 seconds to make sure that both
SlingCatcher and your TV are warmed up. Double-check the Input source
setting. If your TV and SlingCatcher are warmed up and you've selected the
correct Input source setting, it's possible that your TV is not set to accept the
video format being output by SlingCatcher. Press the Enter (
SlingCatcher remote control every 5 seconds to change the video format being
output by SlingCatcher until you see the SlingCatcher Welcome screen clearly
on your TV.
If this does not work, see page 11 of this manual for more troubleshooting
tips.
) button on the
7