Table of Contents
Advertisement
mORE SLINGCATCHER INFO
For more information on SlingCatcher Desktop, SlingSync and SlingProjector, please
visit: http://www.slingcatcher.com
If you need more help, visit our support web site at http://support.slingmedia.com
for SlingCatcher tips and tricks, tutorials and information on how to contact the
Sling Media tecnical support team.
TIPS AND TROUBLESHOOTING
Before you do anything else, make sure that all audio, video, and network cables
are connected as described in this manual. If the problems continue, look for
your symptoms below:
No video on your TV
1. Check the TV input source setting if your TV has them. It should be set to the
same input that SlingCatcher is connected to.
2. Check the video cables. They should be connected correctly to your TV and to
SlingCatcher (See page 5 of this manual).
3. If this is a first setup or installation, SlingCatcher may not be outputting a video
format that can be accepted by your TV. Press the enter button every 5 seconds
until you see the SlingCatcher Welcome screen clearly on your TV.
SlingCatcher does not respond to the remote control
1. Make sure that the batteries in the remote have been inserted correctly. Remove
them and check the diagram inside the battery compartment. Reinsert them as
shown in the compartment.
2. Replace the remote control batteries if the red light on the remote still does not
flash when you press the OK button.
3. Make sure that the front of the SlingCatcher is not blocked.
No audio
1. Make sure that the audio cables are connected correctly to your TV or home
theater system and SlingCatcher (See page 3 of this manual).
2. Make sure that your TV or home audio system is turned on and the volume is
turned up. (Refer to the user manuals for this equipment for more information.
These are often available on the manufacturer's web site.)
11
Advertisement
Table of Contents
