Canon TS9000 series Online Manual page 258

10. Check print settings and touch Color button.
11. Follow on-screen instructions to set printable disc.
Note
• You can see the procedure to set the printable disc by selecting How to set.
• For more on setting the printable disc:
Placing a Printable Disc
12. Select OK.
The printer starts printing.
Note
• Touch the Stop button to cancel printing.
• After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or
expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has
dried.
• To keep the print quality at an optimal level, we recommend you stop printing discs once every ten
discs when printing more than ten discs continuously. To stop the printing operation, detach the
disc tray from the printer and close the disc tray guide. After approximately three minutes have
elapsed, open the inner cover, attach the disc tray to the printer and resume printing.
• If printing is misaligned, adjust the printing position using Adjust disc print area in Print settings
under Device settings.
Print settings
258