Intermec PD41 User Manual page 16

PD41 and PD42 Commercial Printer User's Guide
Printer Command Language Descriptions
Command
Language Description
Fingerprint
Intermec Fingerprint is a BASIC-inspired, printer-resident
programming language you use to design label formats
and write custom printer application software.
IPL Intermec Printer Language (IPL) is an easy-to-use
programming language that lets you design, download,
and modify formats.
ZSim ZSim is a Zebra™ interpreter program that interprets ZPL
II or later programs. To set up, configure, and use ZSim,
see the
DSim DSim is a Datamax™ simulation program that runs
Datamax programs. To set up, configure, and use DSim,
see the
ESim ESim is a built-in protocol for use with Intermec bar code
label printer. To set up, configure, and use ESim, see the
ESim Programmer's Reference
To select the printer command language on the PD42 printer
• Press the soft key that corresponds to the printer language you
want to run on your printer.
Choose command
language
FP IPL
PD42 Startup Screen: This screen appears the first time you turn on the
PD42.
ZSim User's Guide.
DSim User's Guide.
DSIM ESIM
ZSIM
Chapter 1 — Using the Printer
Manual.
5