Table of Contents
Advertisement
5. Logon on the Console
Once the terminal has connected to the device, power on the XGS3 Managed
Switch, the terminal will display that it is running testing procedures.
Then, the following message asks the login user name and password. The factory
default user name and password as following and the login screen in Figure 5-1
appears.
Username: admin
Password: admin
Figure 5-1 XGS3 Managed Switch Console Login screen
The user can now enter commands to manage the Switch. For a detailed
description for the commands, please refer to the following chapters.
1. For security reason, please change and memorize the new pass-
word after this first setup.
2. Only accept command in lowercase letter under console inter-
Note
face.
7
Advertisement
Table of Contents
