Programming A Recording (Without 'Showview') - Philips VR605A/58 Product Manual

D The programming information has been stored in a
TIMER block.
g
Make sure that the cassette you have put in can be
recorded on.
h
Switch off with
STANDBY/ON m
The programmed recording will only function when the
video recorder is switched off with
D If any of the TIMER blocks are in use, '
on the video recorder display.
D While a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press
STANDBY/ON m .
D If the video recorder is switched on a few minutes
before a programmed recording is supposed to
begin, 'SWITCH TO STANDBY- TIMER
RECORDING' will flash on the TV screen.
D If you reach the end of the cassette during a
recording, the video recorder will automatically
eject the cassette.
D If you forget to load a cassette, 'NO CASSETTE'
will appear on the TV screen and '
video recorder display.
D If you have put in a cassette which cannot be used
for recording, the video recorder will automatically
eject it.
D If 'ALL TIMERS OCCUPIED' appears on the TV
screen when you press
all the available TIMER blocks. If you want to clear
or check a TIMER block, select it with
.
rP =
D Programme numbers 'E1' and 'E2' are for
recordings from other sources (through scart socket
or
AV1 EXT1 AV2 EXT2
.
.
STANDBY/ON m
' will light up
k
' will flash on the
k
, you have used up
TIMER k
or
;P q
).
Programming a recording
(without 'SHOWVIEW')
a
Switch on the TV set and select the programme number
for the video recorder.
b
Press on the remote control twice . The free
TIMER k
TIMER block will be highlighted.
c
Press . The information will appear on the
TIMER k
screen.
TIMER
DATE REP. PROG. START PDC
21 MO-FR 01
________________________________
d
With , or
TIMER k P
'PROG.' (programme number), 'START' (start time) and
'END' (end time).
Enter or change your information with
, or with the number buttons
rP =
D Under 'DATE', use the
or weekly programming.
'ONCE': Recording once
'MO-FR': Recording from Monday to Friday.
'WEEK.': Recording every week on the same day.
D Under 'START', use
or off. If ']' appears in the display, 'VPS/PDC' has
been switched off.
e
Confirm with when the information is correct.
OK
D The programming information has been stored in a
TIMER block.
f
Make sure that the cassette you have put in can be
recorded on.
g
Switch off with
STANDBY/ON m
The programmed recording will only function when the
video recorder is switched off with
D If any of the TIMER blocks are in use, '
on the video recorder display.
VPS
END
20:00 ] 21:30
STOREpOK
you can select 'DATE' (date),
Q
;P q or
.
0-9
button to select daily
SELECT
to switch 'VPS/PDC' on
SELECT
.
STANDBY/ON m
' will light up
k
21