Table of Contents
Advertisement
Automatic search for a blank space on the
tape
You can search for a space on the tape (at least 1 minute of
blank tape) for a new recording, for example, after an existing
recording on the tape.
a
Press
INDEX E
. Then press
This will, for example, appear in the display.
b
When the video recorder find a blank space, it will
automatically switch to 'pause'.
D If no empty space has been found when the end of
the tape is reached, the cassette will be ejected.
Picture interference
If the picture quality is poor when you play a cassette, please
follow these instructions.
Tracking during playback
a
While a cassette is playing, hold
the picture quality is at its best.
'TRAC' (tracking) will appear on the display.
b
Wait a few seconds, until 'TRAC' disappears from the
display. These picture settings will not change until you
eject the cassette.
Tracking during still picture
If the still picture vibrates vertically, you can improve the still
picture as follows:
a
During still picture, hold
picture quality is at its best.
'JITT' will appear in the display.
b
When you release the button, 'JITT' will disappear. The
video recorder will store these settings automatically.
D Please note, however, that interference may still
occur with poor quality cassettes.
16
STOP h
.
0:00:
00
or
until
rP =
;P q
or
until the
;P q
rP =
Advertisement
Table of Contents
