Table of Contents
Advertisement
3.
IMPORTANT NOTES FOR OPERATION
General information
D You can switch on with
buttons
or by putting in a cassette.
0-9
D If you have not used the video recorder for a few
minutes, it will switch to standby automatically. For
more information, please read the section
'Automatic switch-off' in chapter 'additional
functions'.
D If you have switched the video recorder off with
, the time will show in the display, for
STANDBY/ON m
instance , '18:00'.
If the clock has not been set, '--:--' will appear.
D When the video recorder is switched off and the
time isn't shown in the video recorder display, the
clock display may be switched off. You will find more
information in the section 'Saving energy'.
D Keep your video recorder connected to the mains at
all times to ensure that programmed recordings can
be made and that the television works normally.
Your video recorder uses less than 4 Watts (with
clock-display switched off).
D If the video recorder is not plugged into the mains, it
will usually store TV channels for one year and timer
and date information for three hours.
, the number
STANDBY/ON m
Saving energy
To save energy, you can switch off the clock display on the
video recorder. Programmed (TIMER ) recordings will take
place even if the clock display has been switched off.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press
on the remote control. The main menu will
MENU
appear.
Select the line 'SPECIAL SETTINGS' with
c
and confirm with
;P q
SPECIAL SETTINGS
OSD
CLOCK DISPLAY
COUNTER
SAT RECORDING
REPEAT PLAY
DIRECT RECORD
________________________________
EXITpMENU
d
To switch off the clock display on the video recorder,
select 'OFF' in line 'CLOCK DISPLAY' with
D To switch the clock display on, select 'ON'.
e
Confirm with
.
OK
'STORED' will briefly appear on the TV screen.
f
To end, press
.
MENU
Emergency interrupt
You can use
STANDBY/ON m
remote control to interrupt any function.
So if you are having operating problems, you can just interrupt
the function and start again.
And you can practise operating your set without any worries.
No matter which buttons you press, you cannot damage it.
rP =
.
OK
è ON
p
OFF
T.LEFT
OFF
OFF
OFF
STOREpOK
P
.
on the video recorder or the
or
11
Advertisement
Table of Contents
