Helpful Hints; Programming A Recording (Without The Video Plus+ System) - Philips VR740/02 User Manual

6.
6.
The decoded data appears after confirma-
tion. You can go back to change the data.
Select the corresponding input field using
FWD 1- B CLEAR
.
0..9
7.When all inputs are correct, press
7.
The programming information is stored in a
TIMER block.
Switching on 'VPS/PDC' in the 'START' input
field
Select 'VPS/PDC' using
Press '1' to switch off 'VPS/PDC' or press '2' to
switch on 'VPS/PDC'.
8.
8.
Insert a cassette with an intact security tab
(unprotected).
9.
9.
Switch off with
STANDBY/ON y y
grammed recording will only function when
the video recorder is switched off with
.
STANDBY/ON y y
If any of the TIMER blocks are in use, ' REC' will
light up on the video recorder display.

Helpful Hints

The video recorder will not operate
* While a programmed recording is being made,
you cannot operate your video recorder manually.
If you want to cancel the programmed recording,
press .
C / A
'TURN OFF VCR FOR TIMER RECORDING'
flashes on the TV screen
* The video recorder was switched on several min-
utes before the start of a programmed recording.
Switch off the video recorder with
A programmed recording (timer) will only function
if the video recorder is switched off.
Cassette is ejected during recording
* The end of the tape was reached during recording.
Error message: ' ' will flash in the video
recorder display
* No cassette was inserted. Insert a cassette
and switch off the video recorder using
STANDBY/ON y y .
Cassette was ejected as soon as the
button was pressed
STANDBY/ON y y
* A cassette was inserted with the security tab
removed.
Undo the erase protection (chapter 'Manual
Recording', section 'Preventing accidental eras-
ing') or insert a different cassette.
. Change the data with
STATUS/EXIT
FWD 1- B CLEAR
. The pro-
STANDBY/ON y y
Error message: 'FULL'
* If this error message appears after pressing
, then all TIMER blocks are already pro-
SV/V +
grammed. No more recordings can be pro-
grammed. If you want to clear a programmed
recording (TIMER block), select the programme
.
number on TIMER LIST menu and press
Programming a recording (without
the VIDEO Plus+
.
1.Switch the TV on. If applicable, select the pro-
1.
gramme number for the video recorder operation.
2.Press
2.
MENU
3.Select 'TIMER' with
3.
press
FWD 1- B
4.Select ONCE, DAILY, or WEEKLY recording
4.
with
PLAY B-K
FWD 1- B
SELECT K L CHOOSE B
END=EXIT
If all Timer blocks are in use, 'FULL' will appear
on the OSD.
5.
5. Select the desired Timer block with
Selecting once/daily/weekly recordings
Use
PLAY B-K
lowing options:
'ONCE': Recording once
.
'DAILY': Repeated daily recordings from
Monday to Friday
'WEEKLY.': Repeated weekly recordings (every
19
® system)
. The main menu will appear.
PLAY B-K
.
. Then press
STOP C-L
.
ONCE
DAILY
WEEKLY
TIMER LIST
to select from the fol-
STOP C-L
week on the same day)
.
CLEAR
. Then
STOP C-L
.
0..9
EN