Connecting Without A Scart Cable; Connecting Other Equipment - Philips VR605A/58 Product Manual

h
Then, read the paragraph 'Initial installation' in the
chapter 'INSTALLING YOUR VIDEO RECORDER'.

Connecting without a scart cable

a
Switch off the TV set.
b
Remove the aerial cable plug from your TV set and insert
it into the socket at the back of the video recorder.
2
c
Plug one end of the aerial cable provided into the
socket on the video recorder and the other end into the
aerial input socket on your TV set.
d
Insert one end of the mains cable into the mains socket
at the back of the video recorder and plug the other
4
end into the wall socket.
e
Switch on your TV set and select the programme number
that you have chosen for video playback (see instruction
manual TV set).
f
Tune in the TV set until this picture appears.
D The video recorder will now transmit on channel 36/
Frequenz 591MHz.
CONGRATULATIONS
YOU NOW OWN A NEW
PHILIPS
VIDEO RECORDER
D If the picture quality of TV channels on your TV is
poor, please read the section 'Reducing picture
disturbance - optimizing the modulator' in the
chapter 'ADDITIONAL FUNCTIONS'.
3
CONTINUEpOK
g
When the TV has been tuned read the paragraph 'Initial
installation' in the chapter 'INSTALLING YOUR VIDEO
RECORDER'.

Connecting other equipment

You can connect additional equipment to the
For example: a decoder, a satellite receiver or a camera
recorder.
You can connect a hifi-stereo set to the socket
(audio output left/right).
AUDIO OUT L R
socket.
AV2 EXT2
5