Programming A Recording (Without 'Showview') - Philips VR605/58 User Manual

f
Confirm with the
OK
correct.
D The programming information has been stored in a
TIMER block.
g
Select the recording speed SP or LP with the
button..
h
Make sure that the cassette you have put in can be
recorded on.
i
Switch off with the
STANDBY m
The programmed recording will only function when the
video recorder is switched off with the
button.
D If any of the TIMER blocks are in use, '
on the video recorder display.
D While a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press the
STANDBY m button.
D If the video recorder is switched on a few minutes
before a programmed recording is supposed to
begin, 'TIMER RECORD' will flash on the TV
screen.
D If you reach the end of the cassette during a
recording, the video recorder will automatically
eject the cassette.
D If you forget to load a cassette, 'NO CASSETTE'
will appear on the TV screen and '
video recorder display.
D If you have put in a cassette which cannot be used
for recording, the video recorder will automatically
eject it.
D If 'TIMER FULL' appears on the TV screen when
you press the TIMER k
the available TIMER blocks. If you want to clear or
check a TIMER block, select it with the
P r button.
D Programme numbers 'E1' and 'E2' are for
recordings from other sources (through scart socket
or
EXT.1 AV 1 EXT.2 AV 2
18
button when the information is
SP/LP
button.
STANDBY m
k ' will light up
k ' will flash on the
button, you have used up all
qP
).
Programming a recording
(without 'SHOWVIEW')
a
Switch on the TV set and select the programme number
for the video recorder.
b
Press the
TIMER k
c
Select a free TIMER block with the
Press the TIMER k
d
With the TIMER k
'DATE' (date), 'PROG' (programme number), 'START'
(start time) and 'END' (end time).
Enter or change your information with the
button, or with the number buttons
P r
D Under 'DATE', use the
or weekly programming.
'D': Recording from Monday to Friday.
'W': Recordings every week on the same day.
D Under 'START', use the
'VPS or PDC' on or off.
e
Confirm with the
correct.
D The programming information has been stored in a
TIMER block.
f
Make sure that the cassette you have put in can be
recorded on.
or
D Use the
'SP' or 'LP'.
button on the remote control twice .
qP
button.
DATE PROG START V/P END
01 01 20:00 21:30
------------------------
gTIMER CLEAR gCL
NEXT
-/+ 0-9 D/WgSELECT OK
, C or D button you can select
button to select daily
SELECT
button to switch
SELECT
button when the information is
OK
button to select the recording speed
SP/LP
or P r button.
or
qP
.
0-9