Table of Contents
Advertisement
PREPARING YOUR CLEANER
Insert the main handle in the
cleaner body and then adjust
handle up/down to the desired
height.
Insert the battery pack by pushing
it into the cleaner slot ensuring it
is fixed in position, you will hear a
click when fully located.
ACCESSORY STORAGE & ASSEMBLY*
Assemble the mini turbo brush
holder to the handle tube of
the cleaner, fit the mini turbo
nozzle to the holder.*
Fit the 2 in1 Dusting & Crevice
tool to the cleaner.
Insert the long crevice into the
extension tube and fit to the
cleaner.
* Certain models only
SWITCH
Always ensure the battery
has sufficient electrical
charge by pressing the
charging status button prior
to use.
1. Main Power On/Off Switch
The Product will always start
working in standard mode when
you press the ON/OFF button.
2. Turbo Mode Switch
To enable turbo mode press
turbo power button for deep
clean.
3. Brush Bar Switch
Press the brush bar on/off
button at the top of the unit.
Brush Bar ON - recommended
for carpets.
Brush Bar OFF - suitable for
hard floors.
- 4 -
CLEANER RELEASE
Recline to unlock the cleaner
Twist the handle to manoeuvre under or around
furniture.*
GB
Advertisement
Table of Contents
