Assembly - Hoover FUSION BH53100/CA User Manual

Assembly

Push the Reach Wand down
onto the Powered Nozzle until
it clicks into place.
1
WARNING
To reduce the risk of personal injury, remove battery
before cleaning or servicing.
8
Push the Handheld
down onto the Reach
Wand until it clicks
into place.
2
IMPORTANT
This vacuum cleaner is not free standing. In between uses or when carrying out any maintenance always lie flat on the
floor in a suitable location so it does not become a trip hazard or can be stepped on.
Before first use be sure to
fully charge the battery.
TIP: Charging your Hoover
Battery may take up to 3 hours
3
®
Lithium