JRC JAX-9B Installation Manual page 50

4. Setting
JAX-9B W-FAX Installation Manual
4.3.5. Operation Check
Check the automatic time correcting operation.
1) Timing for automatic time correction
The automatic time correction is performed at the following timing, but the LCD indicates no message
of the time correction completing.
• Power ON
• Timer program recording starts
• Completes the facsimile image recording
2) Operation check
Confirm that the "GPS OK" message is indicated on the LCD. Start the current time indication mode
and this message is indicated when the automatic time correction is completed normally by received
data from the GPS receiver.
No. Switch
1
2
3
7ZPNA4095
Indication
36
Description
• Start the current time indication
mode.
• "GPS OK" message is indicated
on the LCD when the automatic
time correction is completed
normally.
• Stop the current time indication
mode.