Installing The Software For Receiving Fax Images - JRC JAX-9B Installation Manual

5. Setup of the PC for receiving FAX image (Option)
JAX-9B W-FAX Installation Manual

5.3. Installing the Software for receiving FAX images

1) Take out the CD-ROM from the package of JAX-9B option kit.
CD-ROM label: "PC Software for JAX-9B"
2) Set the CD-ROM to the PC
3) Double-click the "setup_CYC-xxx_WFAXview_V100.exe" in the root folder of the CD-ROM.
4) The setup software is installed automatically
Installed folder: C:¥ProgramFiles¥JRC¥W-FAX
5) The icon of "WFAXview" is put on the desktop.
6) Connect JAX-9B to the PC. (Refer to the 3.5 clause)
Turn on the power of JAX-9B, and double-click the icon of "WFAXview".
The software for receiving FAX images starts.
7) The dialog which requires inputting a COM number of the PC for connecting appears.
Enter the COM number to connect to JAX-9B.
* The dialog which requires inputting a port number for connecting appears only at the first
activation, and does not appears at the activation of the 2nd henceforth.
Refer to the "Instruction Manual of PC Software" when the COM number of the PC is changed.
* Confirm the COM number by referring to the 5.2 clause when the COM number is not
recognized.
8) Communication link test between the PC and JAX-9B is started.
The error message will appear when the result of test is a failure.
Check the wiring between the PC and JAX-9B, and reboot the setup software.
9) Starts the setup function of the Software for receiving FAX image.
Set the save folder for saving FAX images.
* Refer to the "Instruction Manual of PC Software" for details.
10) The FAX image which JAX-9B is recording is displayed also on the screen of PC.
7ZPNA4095
44