Table of Contents
Advertisement
Note: previously paired devices that are no longer in range may continue to appear in the scan results for
Bluetooth devices. If you prefer not to see these devices shown, just scroll to the device name in the list,
scroll down to the line below the name, and select the Unpair option.
10.9 Braille Display Mode
To use VarioUltra in Braille Display Mode you have to slide the Device Mode switch toward you.
Note:
As of this writing, some screen reader software drivers have not been updated to work directly
with VarioUltra, which requires use of the Emulation Mode
o
This is explained in more detail in section 2.3, Using VarioUltra as a Bluetooth Braille
Display.
o
Emulation Mode lets you trick the screen reader to recognize VarioUltra as another
supported BAUM braille display, such as VarioConnect or Pronto.
So before switching VarioUltra from Notetaker mode to Braille Display mode, make sure which
emulation is needed.
COBRA 10.1 screen reading software from BAUM is fully compatible with the default VarioUltra
emulation.
For iOS devices running iOS 7 through iOS 8.2, select the Pronto emulation.
For iOS devices running iOS 8.3, select the VarioUltra emulation.
For Android devices, select the VarioConnect emulation.
For Mac computers running OSX Yosemite or higher, select the VarioUltra emulation.
Please refer to section 2.4 for additional instructions on changing the emulation settings.
10.10 Exit Settings
To exit Settings and return to the main menu, press and hold system key S3.
11
Chapter 11: Help.
VarioUltra has two Help features.
To obtain general information about VarioUltra, enter command v+B7B8B9B0. From there you can use display
keys D2 and D5 to navigate through the information presented there. Scroll down with the Navistick and confirm
with OK to exit.
In virtually every other area of the product, entering command B9+B2B6 will display context sensitive help for the
menu item, application, or dialog box that you are interested in learning more about.
The Help section that you open with shortcut h+B7B8B9 is where you will find a copy of this user manual, plus any
other release notes that become available from time to time. When selected, these documents open in the word
processor, which results in you leaving the help section.
11.1 Exit Help
To exit Help and return to the main menu, press and hold system key S3.
12
Chapter 12: Command Menu.
The Command Menu is accessible from inside applications in VarioUltra. To access it, tap system key S3.
You can exit the Command Menu at any time by tapping system key S3 again.
The following sections explain the different sub-menus within the Command Menu list.
12.1 Command > File Menu
The following sections provide step-by-step instructions on the following elements of the File Menu:
Create a new sub-folder
Open a file or folder
52
Advertisement
Table of Contents
