Table of Contents
Advertisement
Here are the instructions to change the save location (path).
1. Get to the Save As dialog. If you forgot how, please refer to previous section 4.8.9, "Save As", for
detailed instructions.
2. Confirm the browse button in the save as dialog.
3. A dialog opens.
4. The file and folder list presents the folder used for the last save location, or the first file of this
folder.
5. Move the Navistick up or down, left or right to select and open the desired folder.
a. Possible save locations include the internal storage "Flashdisk", an external USB stick
"Stick", and/or their respectively assigned sub folders.
6. To quit the folders list and access the other dialog elements and buttons, press display buttons
D4+D6 or D1+D3.
7. The info field "path" now presents the new save location, i.e. "/Flashdisk/Edit".
8. To change the save location again, go back to the file and folders list.
9. Confirm with "OK". This brings you back to the save as dialog. The info field "path" also presents
the selected saving location.
The "new folder" button is useful for times when you want to save the file in a new subfolder. Another
dialog will open to create this new folder.
4.9
Create a New Blank Document
We have now learned how to save, close, and open new files in VarioUltra. To create a new blank document,
follow these instructions:
1. Open the command menu by tapping S3. This accesses the "File" menu.
2. Move the Navistick to the right to open the "File" submenu.
3. Move the Navistick up or down to the "New..." item, and press either the Navistick or the left thumb key.
4. If another item is selected by mistake, press the general cancel command, B9B0+B7B8.
5. This accesses the "Name" edit box. The suggested name "Document" can be confirmed by pressing the
left thumb key, or you can backspace over it with B7 and type in a different name, remembering to press
the left thumb key to confirm.
6. The new document is now open and the cursor is at the beginning of the braille line.
Our previously opened document is still open, however. We can easily switch between open files with command
B9+B3B6B8.
For more detailed instructions on create a new blank document, please refer to section 12.1.5.
4.10 Context Sensitive Help
Context Sensitive Help provides detailed information about an element, and its functions. Open Help at any time
with command B9+B2B6. Use the D2 and D5 buttons to navigate through the help messages. Confirm with OK to
exit.
4.11 Exit Word Processor
To exit the Word Processor and return to the main menu, press and hold system key S3.
5
Chapter 5: PDF Document Viewer.
The PDF Document Viewer is an application for opening and reading PDF documents. You will find additional
options relating to the PDF Document Viewer application within the command menu, accessed by tapping S3.
You can move around an opened PDF document with similar commands as those found in the word processor
application.
It is possible to save an opened PDF file as a text file, or you may highlight a text passage within the opened
PDF file, copy it to the clipboard, and paste that information into another document in the word processor
application.
Note that this is only possible with PDF files that are not copy protected. When opening password protected
26
Advertisement
Table of Contents
