Other; Messages Relating To Bd Disc And Dvd Disc - Yamaha BD-S1900 Owner's Manual

Troubleshooting
• Other
Problem Possible causes and solutions
The TV operates incorrectly.
-
Some TVs with wireless remote control capability may operate in..:orrectly when using
the remote control of this Player. Use such TVs away from this Player.
The Player heats up during use.
- When using this Player, the console cabinet may heat up depending on the usage
environment. This is not a malfunction.
• Messages Relating to
SO
disc and
OVO
disc
- The following messages appear on the TV screen in case the disc you tried to playback is not appropriate or the
operation is not correct.
Error message Possible Error Possible Error
Cannot play.
-
The disc cannot be played back with this Player. - Check the disc, and load it correctly.
Incompatible disc.
- If you load a disc which cannot be played with
this Player (i.e. a scratched disc). or if you load
a disc upside down, this message will appear.
and the disc tray will automatically pop out.
- Occurs if the loaded disc cannot he played - Remove the disc.
because it is a non-standard disc or scratched.
elC.
Cannot operate. - Occurs if an operation is incorrect.
This USB memory is not formatted
- Occurs if there is a formatting error.
-
Format the USB memory again.
properly. Please format the memory in
- Occurs if the USB memory is not formatted
- Format the USB memory with your
USB memory management.
with FAT 32/16. PC.
The Connected USB Memory cannot -
Occurs if USB memory not compliant with - Connect USB 2.0 High Speed
be used. It should be compliant with
USB 2.0 High Speed (480Mbit/s) is used (i.e. (480Mbit/s) compliant USB
USB 2.0
USB \.O/USB \.1). memory.
To Reset this Player
[f this Player recei ves strong interference from a source such as excessi ve static electricity, strong external noise,
malfunction of power supply. or voltage caused by lightning during use or a wrong operation is sent
to
the Player, errors
like the Player not accepting an operation may occur.
CD
Press and hold
C)
on the Player until
"FE SET"
appears on the front panel display when the Player does not operate
properly even after the power has been turned off.
o
Turn on the power.
Notes
- When a reset is performed while the power is on, the Player will turn off. Turn the power on again. At this point, it
may take a few moments for the system processing to finish before the Player is ready for use.
- When the problem persists even after performing a reset, unplug the power cable and plug it in again. If this does
not solve the problem, contact the nearest service center approved by Yamaha.
Keylock function
You can set the keylock to prevent accidental operations. Press and hold. and
~/~
on the front panel for more
than 4 seconds while no disc is inserted in this Player and the disc tray is closed.
Each time you perform this operation, the function is activated or deactivated.
If you try to operate the Player while the keylock function is set, "Lock" blinks on the front panel display to indicate
that the key lock function is set.
41
En
5
»
c
c
=i
o
z
»
r
Z
"T1
o
::0
s::
»
-l
o
Z
I