Yamaha BD-S1900 Owner's Manual page 39

- The Ethernet connection speeds can be set when you
select "Yes", then press ENTER.
- As automatic detection is made (factory preset
mode), this setting is not normally necessary. If a
situation occurs in which the Ethernet connection
fails, etc., change the setting and confirm if the
Ethernet connection successfully works.
When the connection speed is set, select "Next",
then press ENTER.
@ For testing the connection to the internet, after
confirming the settings, press
<J /
[>
to select 'Test",
then press ENTER.
- As a result of the test. if the internet connection fails,
enter the setup values manually.
@ Press
<J /
[>
to select "Complete", then press
ENTER.
The operation procedure for inputting
characters manually
Note
- Numeric characters such as IP address can be
entered on the input screen either by selecting each
of the characters in the "Numeric" mode or using the
Number buttons on the remote control.
CD
Press ENTER at the boxes in which characters are to
be entered, and the input screen will appear.
Selected by pressing
6. / V
Selected by pressing
<J /
[>
®
Press
6. / 'V
to select the desired input mode.
- When inputting the address of the proxy server;
"I ABC" (Alphabet/numeric character) / "Sign" /
"Edit"
Settings
- When inputting other values (IP address, etc.);
"Numeric" / "Edit"
@ Press
<J /
[>
to select a number/character, then press
ENTER.
@ Repeat step 3 to display all of the desired characters/
numbers in the input field.
Example: The screen for inputting numeric characters
Note
- Press RETURN (DeI.Char.) to delete a number/
character you have input.
To change a number/character you have input, press
B (Left) or C (Right) to select the number/character
you want to change, and press RETURN
(DeI.Char.). Then, press
<J /
[>
to
select a new
number/character you want to input, and press
ENTER.
®
Press 0 (Complete) to fix the numbers which have
been input.
®
Repeat step I to 5 to finish inputting all the required
characters.
35
En
4
CJ)
m
~
z
"
CJ)
I