Setting The On-Screen Display Language; Updating The Software Of This Unit - Yamaha BD-S1900 Owner's Manual

indicator
Descriptions
REii' ALL
Lights up when playing back disc or title
repeatedly.
REP A-B
Lights up when playing back a section
repeatedly.
Adjusting the brightness of the front
panel display
If you feel that the front panel display is too bright when
watching movies, you can adjust the brightness by
pressing DIMMER repeatedly on the remote control.
• Setting the on-screen display
language
0~.Lp~1
I
STATUS
I
c=::J-B
SEARCH
Bc=::J-B
000-0
CD
Press SETUP
to
display the Setup Menu screen.
[
~ : : : ;
E:
"_f'
tJ
F_:' _ _
~
®
Press
6 / 'V / <J /
[>
to select "On Screen
Language", then press ENTER.
@ Press
6 / 'V
to select the language you want to
display on the screen, then press ENTER.
Before Starting Playback
Notes
- The language display in step 3 is an example for
U.S.A., and Central and South America models.
- To select the DVD disc language, such as subtitle
language, etc., see page 26.
• Updating the software of this unit
Some of the newly released BD video discs cannot be
played back unless you update this Player software to the
latest version. We recommend updating the software of
this unit with "Software Update" so that this Player is
operated based on the latest software.
The USB memory device must be clear of all files
except software update data to allow new software
uploading.
To check for the availabitity of a software update, visit
http://www.yamaha.co.jp/english/product/av/downi
agreement.html.
When a software update is performed, the software
update data must be written onto the USB memory
device in advance using a PC. When software update
data is released, copy the data onto a USB memory
device after downloading it to a Pc. Delete unneeded
software update data using a PC after the software
update process is completed.
CD
Insert the USB memory device with the update file into
the USB BD STORAGE/SERVICE terminal on rear of
this Player.
®
Press SETUP to display the Setup Menu screen.
@ Press
6 / 'V / <J /
[>
to select "Settings". then press
ENTER.
@ Press
6 / 'V
to select "Software Update", then
ENTER.
- If you have not yet set the password, go to step 6.
®
Enter the 4-digit number using 0-9.
®
Press ENTER to start checking data in the USB
memory device.
(J) During the data checking, "Checking" blinks.
17
En
3
I