Other Connections; Connecting To The Remote Control Jacks; Connecting The Power Cable - Yamaha aventage bd-a1040 Owner's Manual

■ Connecting to the REMOTE
CONTROL jacks
– You can transmit and receive the remote control
signals by connecting to the REMOTE CONTROL
(OUT/IN) jacks.
– Firmly connect monaural 3.5 mm mini plug cables
(commercially available) to the REMOTE
CONTROL (OUT/IN) jacks.
Caution!
Do not connect the power cable of this
Player until all connections are completed.
This Player
OUT
AUDIO OUT
To REMOTE
CONTROL
(OUT) jack
Monaural 3.5 mm
mini plug cable
To remote
control in
jack
REMOTE CONTROL IN
Yamaha component
18
En

Other connections

IN RS-232C
REMOTE CONTROL
To REMOTE
CONTROL (IN)
jack
Monaural 3.5 mm mini
plug cable
To remote
control out
jack
REMOTE CONTROL OUT
Infrared signal receiver
or Yamaha component
(such as AV receiver)
Hints
– If your AV receiver is a Yamaha product and has the
capability to transmit SCENE control signals from
the REMOTE OUT jack, you can control the Player
with the SCENE function. For details about the
SCENE function, refer to the owner's manual
supplied with your Yamaha AV receiver.
– You can connect a Yamaha component (such as CD
player) supports the SCENE function to the
REMOTE CONTROL (OUT) jack of this Player.
– The RS-232C terminal is a control expansion
terminal for commercial use. Consult your dealer for
details.

■ Connecting the power cable

– After all connections are completed, plug the
supplied power cable into the AC IN on the rear of
the Player. Then plug into AC outlet.
32C
To AC outlet
AC IN