Manual Channel Setting - Philips VR 655 Instructions For Use Manual

To Reset the Channels
If you want to re-do the channel setting, follow the
procedure below;
5
1 Press MENU.
2 Press PLAY or STOP
select "TUNER SET UP" then
5
press OK/STATUS.
3 Press PLAY or STOP
to select "AUTO TUNER SET
5
UP" then press OK/STATUS.
4 Press PLAY or STOP
to select the appropriate TV
system [(BG, DK, I)] of your residential area.
5 Press OK/STATUS. Auto programming starts.
When it ends, programmed channels, frequencies
and TV systems are shown on the display.
6 Press MENU to exit.
To Delete or Edit Receivable Channels
5
1 Press MENU.
2 Press PLAY or STOP
5
"TUNER SET UP", then press OK/STATUS.
3 Press PLAY or STOP
select "CHANGING TUNER
SET UP", then press OK/
STATUS.
The programmed channel
5
information list appears.
4 Press PLAY or STOP
channel setting flashes.
4.1: TO DELETE UNWANTED CHANNELS:
Press CLEAR. Repeat this step until you delete
all unwanted channels.
2
* If you have accidentally deleted a channel,
press REW
.
4.2: TO EXCHANGE CHANNEL POSITION:
Press OK/STATUS once so that the channel
number flashes. Using the number button on the
remote control, enter the other channel number
that you want to exchange with, then press OK/
STATUS.
∞
VCR SET UP
to
TUNER SET UP
INITIAL SET UP
∞
SELECT: CONFIRM: OK
END: MENU
CHANGING TUNER SET UP
AUTO TUNER SET UP
∞
SELECT: CONFIRM: OK
END: MENU
∞
to select
∞
to
CH FRQ SYS CH FRQ SYS
01 150 BG 07 229 BG
02 165 BG 08 237 BG
03 195 BG 09 355
04 205 BG 10 365 BG
05 213 BG 11 374 BG
∞
06 221 BG 12 384 BG
SELECT: DELETE: CLEAR
CHANGE CH: OK
END: MENU
∞
until the desired
4.3: TO FINE-TUNE CHANNELS
Press OK/STATUS twice so that the frequency
indication flashes. Press PLAY
fine-tune the station until you get the best
possible picture, then press OK/STATUS.
4.4: TO CHANGE THE TV SYSTEM:
This is necessary if no sound comes out on the
channel.
Press OK/STATUS three times so that the TV
system indication flashes. Press PLAY ∞
STOP
to select the approriate TV system (BG,
DK, I) so that the sound comes out, then press
OK/STATUS.
5 Press MENU to exit.

Manual Channel Setting

1 Repeat steps 1-3 of "To delete or edit receivable
5
channels" on the left column.
2 Press PLAY
in which you want to store a new channel starts
5
flashing, then press OK/STATUS.
3 Press PLAY
the search starting band, then press OK/
STATUS.
VHF L: Starts searching from the VHF L band.
VHF H: Starts searching from the VHF H band.
BG
UHF: Starts searching from the UHF band.
Searching starts, and when a station is tuned in,
searching stops and the tuned frequency is shown
5
on the TV.
4 Press PLAY
CHANNEL", then press OK/STATUS.
The programmed channel
information list appears again
with the settings of the newly
tuned channel flashing.
If you do not want to store the
channel, select "CONTINUE
SEARCH", then press OK/STATUS so that the
search starts again.
5 Press MENU to exit.
7
5
or STOP
∞
or STOP
until a vacant channel
∞
or STOP
to select
∞
or STOP
to select "STORE
STORE CHANNEL
CONTINUE SEARCH
SELECT:
END: MENU
∞
to
5
or
CONFIRM: OK