Selecting Monitor Sound; One Touch Recording (Otr) - Philips VR 655 Instructions For Use Manual

Selecting Monitor Sound

(For VR607/55 only)
If you want to change the sound you listen to while
playing back a HiFi stereo or bilingual tape, press
AUDIO repeatedly.
Each time you press the button, the sound changes
as follows:
=
=
HiFi stereo HiFi left channel
channel Monaural sound on normal audio track.
HIFI:
Normally select this mode.
You can play back a HiFi tape in HiFi stereo mode
and monaural tape in monaural mode.
HIFI L:
Select this mode when you want to play back the
sound recorded on HiFi left channel (usually main
language) of a bilingual programme.
HIFI R:
Select this mode when you want to play back the
sound recorded on HiFi right channel (usually
sub-language) of a bilingual programme.
NORMAL MONO:
Select this mode when you want to play back the
sound recorded on the normal audio track of the
tape.
Note:
• The connections described in "VCR to AV TV
Connection" ( P.4) are required for HiFi stereo
playback.

One Touch Recording (OTR)

The OTR function lets you quickly specify how
long you want a recording to continue. You do not
have to programme the timer.
Make sure....
• The record tab on the cassette is not removed.
• Your VCR, TV and antenna are connected
correctly.
1
On TV
1 Turn on the TV.
2 Select the video channel (or AV mode).
=
HiFi right
11
2
On VCR
Insert a cassette with the record tab in place.
The VCR turns on.
• If a cassette is already in the VCR, turn on the
VCR.
3
Select Channel
5 ∞
Press CH or Number buttons to select the
/
channel to record. 1
• You can also use the
CH+ on the front panel. However, press CH before
pressing these buttons.
4
Start OTR
Press REC/OTR twice.
Recording starts immediately, and the REC
indicator will blink on the display.
This indicates that the VCR
will automatically shut off after
30 minutes of recording.
5
Select Recording Length
Press REC/OTR
repeatedly until the desired
recording length appears.
Each time you press the button, recording length
increases in 30-minute intervals.
= = =
0:30 1:00
REC (Normal recording)
To check time remaining during an OTR
Press OK/STATUS.
To change the recording length during an
OTR
Press REC/OTR
repeatedly until the desired
length appears.
7
To cancel an OTR
Press STOP
to stop recording before the preset
recording length is reached. If you want to cancel
the OTR mode but continue recording, press REC/
OTR
several times until "OTR" changes to
"REC" on the TV screen.
Notes:
• During recording, the displayed time counts down. When
"0:00" is reached, recording stops and the VCR turns off
automatically.
• If an OTR is engaged during pause, the displayed time
counts down normally, but recording does not begin
until you cancel the pause.
¡
REW/CH- and FF/
OTR(0:30)
SP
=
1:30 ..... 5:30
6:00
+
CH12