Philips VR 655 Instructions For Use Manual page 6

2
Setting the Clock/Date
5
1 Press PLAY or STOP
set the time. Each time you
press the button, the set time
changes by one-minute
intervals.
Press and hold the button to change time by 30-
minute intervals.
5
When the time is correct, press OK/STATUS.
2 Press PLAY or STOP
time you press the button, the date changes in
one-day increments. Press and hold the button to
change dates in 15-day increments. When the
5
date is correct, press OK/STATUS.
3 Press PLAY or STOP
time you press the button, the year changes by
one-year intervals. Press and hold the button to
change years rapidly. When the year is correct,
press OK/STATUS.
4 Press MENU.
The message on the right
will appear.
3
Select TV System
1 Press OK/STATUS. The TV
system selecting menu appears
5
on the TV.
2 Press PLAY or STOP
select the appropriate TV
system of your residential area.
B/G : For West Europe, ASEAN countries,
Australia, New Zealand.
D/K : For China, Russia, East Europe.
I : For Hong Kong, South Africa, United
Kingdom.
4
Start Auto Channel Set
Press OK/STATUS to
programme the receivable
channels automatically.
The message on the right appears
on the TV.
∞
to
TIME - - : - -
DATE 01/01/01
SET: NEXT: OK
END: MENU
∞
to set the date. Each
∞
to set the year. Each
CONNECT ANTENNA OR CABLE
TO VCR FOR AUTO CH. SET
READY: OK
END: MENU
SYS COUNTRY
B/G W.EUR. ASEAN AUST.
NZ
D/K CHINA RUS. E.EUR.
I HK S.AF. UK
∞
to
SELECT: CONFIRM: OK
END: MENU
AUTO CH. SET PROCEEDING
PLEASE WAIT
START FINISH
When the auto programming is completed
The following message appears
on the TV, and the lowest
5 ∞
channel will be tuned in.
Press VCR CH
/
channels on the VCR.
¡
You can also use the
FF/CH+ on the front panel. If there is a
1
cassette in the VCR, press CH before pressing the
REW/CH- and
functions as REW and FF.
You have now completed the initial setting.
If you stop the Inital Set Up procedure while it is
proceeding:
The VCR enters the Initial Set Up mode again the
next time you turn on the VCR.
Initial Set Up will not start in the following
cases:
• If there is a tape inserted.
• If any one of the Initial Set Up procedures is
finished manually.
To Reset the Time or Language
You can always change the time and language
setting after you completed the
initial set up.
5
1 Press MENU.
2 Press PLAY or STOP
select "INITIAL SET UP"
5
then press OK/STATUS.
3 Press PLAY or STOP
to select "CLOCK" or "
LANGUAGE", depending on
which setting you want to
change.
4 To change clock/date:
Repeat step 3 (Setting the Clock/Date) of
"Initial Set Up" on page 5.
3
To change language:
Press FF repeatedly to choose your preferred
language, Chinese or English, then press MENU.
6
AUTO CH.SET COMPLETED
to change
1
REW/CH- and
¡
FF/CH+, otherwise it
∞
VCR SET UP
TUNER SET UP
INITIAL SET UP
to
SELECT:
END: MENU
∞
CLOCK
LANGUAGE
SELECT:
END: MENU
CONFIRM: OK
ENGLISH
CHANGE: