Samsung VR3040 Service Manual page 41

Disassembly and Reassembly
1-2-17 Lever Up Down Ass'y, Gear Center
Ass'y Removal
1) Remove the 2 hooks in the direction of arrow as
shown Fig. 1-20 and lift the Lever Up Down AssÕy
Œ.
2) Lift the Gear Center AssÕy ´.
Fig. 1-20 Lever Up Down Ass'y, Gear Center Ass'y
Removal
1-12
ΠLEVER UP DOWN ASS'Y
´ GEAR CENTER ASS'Y
1-2-18 Assembly of Lever Up Down
Ass'y, Gear Center Ass'y
1) Insert the Lever Up Down AssÕy Œ in the 2 rectan-
gular holes on Main Base.
2) Lift the Lever Up Down AssÕy Œ about 35 degree.
(Refer to Fig. 1-21)
3) Insert Ring ¨ of the Gear Center AssÕy ´ in the
Guide ˆ of the Lever Up Down AssÕy Œ.
4) Insert the Gear Center AssÕy ´ in the post Ø on
Main Base.
5) Push down the Lever Up Down AssÕy Œ for lock-
ing of the Hook ∏.
Note :
1) Take care not to separate and loose the Spring Up
Down.
2) When assembling the Gear Center AssÕy, donÕt
push down too much.
´ GEAR CENTER ASS'Y
¨ RING
ˇ GEAR
∏ HOOK 35˚
Ø POST
Fig. 1-21 Assembly of Lever Up Down Ass'y,
Gear Center Ass'y
ˆ GUDIE
ΠLEVER UP DOWN ASS'Y
MAIN BASE
Samsung Electronics