Battery Installation And Charging - VTech VSP601 Quick Reference Manual

Hide thumbs Also See for VSP601:
Table of Contents

Advertisement

VTech VSP601
IMPORTANT INFORMATION
1.
Use only the power adapter supplied with this
product.
To order a replacement power adapter, visit our
website at businessphones.vtech.com
or call 1 (888) 370-2006.
2.
The power adapter is intended to be correctly
oriented in a vertical or floor mount position. The
prongs are not designed to hold the plug in place
if it is plugged into a ceiling, under-the-table or
cabinet outlet.
BATTERY INSTALLATION
AND CHARGING
Install the battery as shown on the following page. Once
you have installed the battery, the screen indicates the
battery status (see the table below). If necessary, place
the handset in the charger to charge the battery. For
best performance, keep the handset in the charger when
not in use. The battery is fully charged after 11 hours of
continuous charging.
If the screen is blank, you need to charge the handset
without interruption for at least 30 minutes to give the
handset enough charge to use the telephone for a short
time. When the battery is low, the handset shows Low
battery and a flashing
Battery indicators
The screen is blank or
The battery has no or little
shows Place in charger
charge. The handset cannot
be used.
and flashes.
The screen shows Low
Battery has enough charge
battery and flashes.
to be used for a short time.
Full battery icon ( )appears. Battery is charged.
1234 Main St | Anycity, US 00000 | 215.555.1212 | www.corporatewebsite.com
.
Battery Status
Action
Charge without interruption
(at least 30 minutes).
Charge without interruption
(at least 30 minutes).
To keep the battery charged,
place it in the charger when
not in use.
To install the handset battery:
1.
Plug the battery connector securely into the
socket inside the handset battery compartment.
Insert the supplied battery with the label THIS
SIDE UP facing up as indicated.
2.
Align the cover flat against the battery compartment,
then slide it upwards until it clicks into place.
3.
Charge the handset by placing it face forward
in the charger. The battery icon indicates the
charge status as the battery charges.
Very low battery charging
less than 30 minutes.
Charging 30 to 80 minutes.
Charging 80 minutes
to 7 hours.
Charging more than 7 hours.
Fully charged at 11 hours.
Important Information
»
Use only the supplied rechargeable battery or
replacement battery (model BT164392).
To order a replacement battery, visit our website
at businessphones.vtech.com or call
1 (888) 370-2006.
»
If you do not use the handset for a long time,
disconnect and remove the battery to prevent
possible leakage.
Quick Reference Guide
3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VSP601 and is the answer not in the manual?

Questions and answers

Table of Contents