Carrier KSACN0401AAA Installation Instructions Manual page 9

Wired remote controller 7 day programmable ductless systems

Hide thumbs Also See for KSACN0401AAA:

Table of Contents

WIRED CONTROLLER UPPER PART REMOVAL

1. Insert a flat screwdriver into the slots in the lower part of the wire controller (2 places).

2. Remove the upper part of the wire controller (see Fig. 5).

NOTE: The PCB is mounted in the upper part of the wired controller. Be careful not to

damage the board with the screwdriver.

Slots

Fig. 5 - Slots

Table of Contents

Show Quick Links

Table of Contents

Ksacn0501aaa