The Vcr - Philips SV2000 SVZ122 Owner's Manual

SVZ122(H1680).QX33 4/6/99 9:42 PM
28 Timer Recording (cont'd)
7
Press the PLAY button or the STOP button repeatedly
until the desired channel number appears. Then, press
the F.FWD button.
If you are using a standard antenna/cable hookup (as shown on
pages six - seven), select the channel of the TV program you
want to record.
If you are recording from line input, select AUX.
If you are using a Cable Box/DBS, select the Cable Box/DBS
output channel (03 or 04). Select the channel you want to
record at the Cable Box/DBS. Leave the Cable Box/DBS on for
the timer recording. Details are on page eight.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 0 5 / 0 6 WED
START TIME 0 7 : 3 0 P M
END TIME 0 8 : 3 0 P M
CHANNEL 16
REC SPEED – –
8
Press the PLAY button or the STOP button repeatedly to
select a tape speed. The arrow will appear beside your choice.
The selected tape speed will flash beside REC SPEED.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 0 5 / 0 6 WED
START TIME 0 7 : 3 0 P M
END TIME 0 8 : 3 0 P M
CHANNEL 1 6
REC SPEED S P
SP
SLP
9
Press the COUNTER RESET/EXIT button.
10
Press the POWER button to turn off the VCR. The TIMER
light will appear. (The TIMER light will flash if there is not a tape in

the VCR.)

If a timer recording will take place several hours or days from
now, you may use the VCR until time for the timer recording. Just
make sure you turn off the VCR about five minutes before the
scheduled start time.
The VCR must be off for a
timer recording to take
place! Make sure a tape is in
Page 28
LP
the VCR.
10
POWER VCR/TV
1 2 3
4 5 6
7 8 9
CHANNEL
0 +100
RENTAL AUTO
SPEED
SELECTOR REPEAT COUNTER
9
MENU DISPLAY EXIT COUNTER
RESET MEMORY
REWIND / PLAY
RECORD / STOP PAUSE/STILL
8
Helpful Hints
• The TIMER PROGRAMMING menu
will not appear at step 1 if the
clock is not set. Follow the steps on
pages 14 - 15 to set the clock.
• Enter the information while the
space is flashing.
• Press the REWIND button to go
back one step from the current step
during steps 2-8.
• To stop a started timer recording,
press the STOP/EJECT button on
the VCR.
More Helpful Hints are on
page 38.
EJECT
CLOCK/
F.FWD
7