Vcr To T\^ Connection - Philips VR388/55 Instructions For Use Manual

Setting
ONNECTED
VCR to TV Connection
Connection
Diagram
1 Disconnect the antenna or Cable from the TV and the AC power
cord of the TV from the AC outlet.
2 Connect the antenna or Cable to the VCR.
3 Connect the VCR to the TV using the RF coaxial cable.
4 Plug the AC power cords of the VCR and TV into the AC out¬
lets.
Outdoor antenna Indoor antenna
f/
-lOSh-
CAUTION-
Do not plug the AC power cords until all
connections are completed.
ANT. IN
Back of VCR
^
RFOUT
Back of TV
[□□a::
i
RF coaxial cable
(supplied)
To watch a picture from this VCR on the TV, select UHF E36
channel (video channel of this VCR when shipped from the factory).
If you want to change video channel, see ''Setting the \^deo Chan¬
nel" (^.PIO).
VCR to AV TV Connection
With this connection, you can get better pictures and sounds when playing back a tape.
To watch a picture from this VCR on the
TV, select the video input on the TV, to which
this VCR is connected.
Back of VCR
ToAV1 IN/OUT terminal
Back of TV
To SCART
terminal
SCART cable
(not supplied)