Advanced Operating; Handsfree - LG BTS1 Owner's Manual

Tv & mobile stereo headset
Hide thumbs Also See for BTS1:
Table of Contents

Advertisement

,
Note
y Depends on the Installed Ap, some features
may be limited or not work.
y Keep the distance less than 10 m between
the Blutooth device and this device.
Available distance may vary depending on
usage conditions.
y If the device is out of the range, the pairing
is disconnected.
To reconnect, make the device be back in
the range. If the device is not reconnected
automatically, press
the device switch into "discovering" mode.
Within 10 m
To connect to other device
To connect with other devices after disconnecting
the previous device.
Turn off the device and follow the instructions
below.
1. Press and hold
button for more than 5
seconds when the device is turned on.
2. When you hear "Discovering" voice information,
turn on the Bluetooth function on your
Bluetooth device to select "LG BTS1".
When the pairing is completed,
"Your device is connected" voice information is
heard, violet
blinking twice.

Advanced Operating

Handsfree

This device supports a handsfree function via
Bluetooth. Before using this function, pair the
device with your phone.
button to make
Receiving a call: Press
incoming call.
Rejecting a call: Press and hold
ignore an incoming call.
Switching the voice output: Press and hold
button for more than 3 seconds during a call.
Receiving a second call (During a call): Press and
hold
To return to the previous call, press and hold
button again
phone).
Finishing a call: Press
When you make a phone call: The voice output is
connected to the device automatically. Depending
on the phone, you need to press
seconds.
To mute or unmute microphone: Press
for 3 seconds during a call.
Operating
button to accept an
button to accept an incoming call.
(Only when call waiting is set on your
button.
button for 3
9
2
button to
button

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents