Calling; Answering A Call; Making A Call; Voice Dialing - LG HBM-586 User Manual

How to use

Calling

Answering a call

- When there is an incoming call, the headset will ring.
- Briefl y press the MFB to answer the incoming call.

Making a call

- If you make a call from the handset, the call will (depending on the phone settings)
automatically transfer to the headset. If the call is not automatically transferred,
you can manually transfer the call by briefl y pressing the MFB on the HBM-586
(handset and headset must be paired).

Voice dialing*

- Briefl y press the MFB to activate "Voice Command".
For best results, record the Voice dialing tag through your headset.
NOTE: If your handset does not support Voice dialing, this action may activate Last
Number Redial.

Last number redial*

- Press and hold the MFB for 1 second to activate "Last number redial".
The headset will beep and then call the last number dialed.

Ending a call

- Briefl y press the MFB.

Transferring a call*

- While on a call on your handset, briefl y press the MFB to transfer the audio to the
headset (the headset and handset must be paired).
- To transfer a call from the headset to handset, press and hold the VOLUME button
for 3 seconds.

Call waiting*

- Answer a second call without hanging up the fi rst call by pressing the MFB for
1second. Press the MFB for 1second to return to the original call.
- Briefl y press the MFB to terminate both calls at once.
8

Call Reject*

- Activate call reject by pressing the MFB for 1 second when the handset rings.
* These functions may only be used if your handset supports them. For further
information about using these features, please consult your handset's user manual.

Advanced multipoint

The LG HBM-586 is capable of having two handsets connected to the headset at the
same time. This will give you the freedom of having only one headset to operate both
of your handsets.

Connection

- Pair the headset with one of your Bluetooth-enabled handsets. (per the pairing
instructions on pages 6).
- Turn off the headset.
- With the power off, press and hold the MFB on the HBM-586 for 6 seconds to enter
Manual Pairing mode.
- Now, pair and connect the headset with your other Bluetooth-enabled handset.
(This will be your primary handset).
- Once this handset is paired and connected, go back and connect the fi rst paired
handset to the headset. (This will be your secondary handset).
* NOTE: When the HBM-586 is connected to two handsets at the same
time(multipoint), the headset calling functions will work with the primary
handset (or handset which made the last outgoing call).

Calling function

- Voice dialing and Last Number Redial features work with the primary handset (or
handset which made the last outgoing call).
- The fi rst connected device is set as the primary handset and the next connected
device is set as the secondary handset.
- The device which made the last outgoing call will always be set as the primary
handset.
- If there is an incoming call on each handset, the fi rst incoming call can be answered
by a brief press of the MFB.
How to use
9