Charging Battery
This device uses built-in battery.
y Plug the USB cable into the USB port at the
bottom of the unit.
And connect the adapter to charge.
y LED lights on red
LED lights on blue
y The device informs the battery status whenever
the device is turned on. (Refer to page 11)
y You can check the battery status by pressing
button twice while using the device.
,
Note
y Before using it, charge the battery in full.
y When the battery is completely discharged,
charging time is approx. 2 hours.
y Operating time is approx. 8 hours. It may
vary depending on the battery status and
operational conditions.
y The device's power is turned off
automatically when the USB cable is
plugged.
while charging.
when charged.
Wearing the Headset
Attach the device to your clothing for more
comfortable fit.
,
Note
It is recommended to keep the distance
within 20 cm between the microphone and
user.
Power On / Off
Power On
y Press and hold
button for approx. 2 seconds.
y "Power on" voice information is heard, blue
blinking four times.
Power Off
y Press and hold
button for approx. 3 seconds.
y "Power off" voice information is heard, violet
blinking four times.
(Refer to page 11.)
7
Getting Started
1