Setting the automatic material thickness detection
Abb. 81: Setting the automatic material thickness detection (2)
(3) - LED
(4) - LED
2. Loosen the screws (5).
3. Turn the threaded pins (6) to set the distance between the sensor (1)
Abb. 82: Setting the automatic material thickness detection (3)
(1) - Magnet
Service Instructions 670/680 - 00.0 - 07/2017
③
④
⑤
and the magnetic strips (2).
• Increase the distance: Screw in the threaded pins (6).
• Reduce the distance: Loosen the threaded pins (6).
①
0.5 mm
(5) - Screws
(6) - Threaded pins
(2) - Magnetic strips
⑥
②
93