Toro TITAN HD Series Setup Instructions page 8

Dealer Initial Customer Initial
Note: When you, the dealer representative, have finished delivering the machine to the customer, sign and date in the space
provide below and keep a copy of this page for dealer records. Also, the dealer must remind the customer to use a full-width
trailer ramp to load the machine.
Signature:
Signature:
Show the customer where the following features are located and how they function:
•
Fuel tank
•
Oil-fill cap/Oil dipstick
•
Spark plug(s)
•
Engine-oil filter
•
Engine-oil drain
•
Fuel gauge, valve, and hose
•
Air filter
•
Hydraulic-fluid reservoir
•
Hydraulic filter
•
Battery
•
Ignition switch
•
Throttle lever
•
Choke (if applicable)
•
Power takeoff switch (PTO)
•
Motion-control levers
•
Parking brake
•
Height of cut
•
Lift-assist lever (if applicable)
•
Adjustable seat
•
Hydraulic-bypass valves
•
Rollover Protection System (ROPS)
Refer to the Operator's Manual to point out safety procedures, operation, and
maintenance procedures.
Review the warranty statement as shown in the Operator's Manual.
Describe the post-sale service procedures for your store.
Assist the customer in filling out and mailing the registration card or register online
at www.Toro.com.
Make sure that the customer receives the Operator's Manual, engine owner's manual
(non-Toro engines), Set Up Instructions, and operator training material.
Make sure the customer knows that the Parts Catalog is available at www.Toro.com.
Assist the customer in loading the machine.
Date:
Date:
8
Check Procedure