Toro TITAN HD Series Setup Instructions page 7

12
Checking the Machine Before Delivery to the Customer (All
Machines)
No Parts Required
Procedure
Before delivering the machine to the customer, ensure that you have performed the procedures listed in the following table and
initial each when finished. Refer to the Operator's Manual for instructions on performing these procedures.
Initial
When you finish setting up the machine, sign and date in the space provided below:
Signature:
13
Delivering the Machine to the Customer (All Machines)
Parts needed for this procedure:
1 Operator's Manual
1 Engine owner's manual (non-Toro engines)
1 Operator-training material
2 Key
1 Registration card
Procedure
At delivery, fill in the model and serial number, complete the items listed in the following table, and initial each when finished.
Model No.
Check the tire pressure.
Check the level of the mower deck.
Check the engine-oil level.
Check the hydraulic-fluid level.
Check that the ROPS is secure.
Check the adjustment of the parking brake.
Ensure that the machine tracks correctly; refer to the Operator's Manual for the adjustment procedure.
Check the safety interlock system; refer to the Operator's Manual.
Ensure that the PTO works.
Check all fasteners that you installed to ensure that they are tight.
Serial No.
Check Procedure
Date:
7