Table of Contents
Advertisement
Why don't my buttons work properly?
When you find that your Pronto NG does not send out the commands in
accordance with what is indicated on the touch screen, it is advised to recalibrate
the touch screen. Calibration is necessary when you notice that tapping a button
activates one of the adjacent buttons or when you have to tap next to a button to
activate it. Calibration enables Pronto NG to place the icons on the touch screen in
line with their predefined functions.
Attention Never use an actual pen, pencil or other sharp object on the touch screen. Use a
How do I calibrate the touch screen?
1 Tap and hold the Pronto NG icon
touch screen for 3 seconds. The Tools Menu appears.
2 Select
The first Settings Page appears.
3 Press the Page Down button at the left side of the Pronto NG.
The second Settings Page appears.
4 Tap
The 'Calibration' screen appears.
5 Tap the upper left corner on the touch screen.
6 Tap the lower right corner on the touch screen.
7 Tap the upper right corner on the touch screen.
8 Tap the lower left corner on the touch screen.
The touch screen is calibrated.
-or-
Press the middle firm key, labeled
The second Settings Page appears again without calibrating the touch screen.
9 Tap the Pronto NG icon
User Guide
51
pointy object like a plastic-tipped pen or a stylus intended for use with touch
screens.
.
in the second Settings Page.
in the upper left corner of the
.
again to exit the Settings Tool.
FAQ
Advertisement
Table of Contents
