Function And Control; Remote Controller Introduction - Gree GWH24ACD-K3NNA1A Service Manual

Service Manual

6. Function and Control

6.1 Remote Controller Introduction

Buttons on Remote Controller
Icon Display on Remote Controller
Set fan speed
Operation mode
Auto mode
Cool mode
Dry mode
Fan mode
Heat mode
Operation introduction of remote controller
This is a general use remote controller, it could be used for the air conditioners with multifunction; For some function, which
the model doesn't have, if press the corresponding button on the remote controller that the unit will keep the original running status.
After putting through the power, the air conditioner will give out a sound.Operation indictor "
you can operate the air conditioner by using remote controller.
Under on status, pressing the button on the remote controller, the signal icon "
blink once and the air conditioner will give out a "de" sound, which means the signal has been sent to the air conditioner.
Under off status, set temperature and clock icon will be displayed on the display of remote controller (If timer on, timer off and
light functions are set, the corresponding icons will be displayed on the display of remote controller at the same time); Under on
status, the display will show the corresponding set function icons.
Technical Information
1
3
6
8
10
11
Temp. display type
:Set temp.
:Outdoor ambient temp.
Turbo mode
2
4
5
7
9
12
:Indoor ambient temp.
Send signal
Child lock
health function
ventilation operation
8 heating function
Set temperature
Light function
I feel function
X-fan mode
Set time
TIMER ON /TIMER OFF
Up & down swing
"on the display of remote controller will
1 On/Off button
2 Mode button
3
Fan button
4 ▲/ button
5
Swing button
6 Sleep button
7 Temp button
8
Turbo button
9
I Feel button
10 Timer button
11
X-Fan button
12
Light button
Sleep mode
" is ON (red indicator). After that,
11