Sony CDP-D12 Service Manual page 14

6. Remove the four screws and remove the bracket (CD).
7. Install the CD mechanism deck assembly by reversing
steps 1 to 6 of removal.
Bracket (CD)
PTT2.6 x 6
1-6
CD mechanism deck
assembly
PTT2.6 x 6
2. Chassis (T388) assembly
1. Remove the CD mechanism deck assembly.
(Refer to item 1 of Section 1-4-1.)
2. Remove soldering at the three positions on the SERVO
board.
3. Remove the four precision screws (P2 x 3) and
remove the chassis (T388) assembly in the direction of
the arrow in the way of disengaging the claws.
4. Remove the SERVO board and the guide (DISC M).
(Refer to item 3 of Section 1-4-1.)
5. Install the SERVO board and the guide (DISC M)
removing the step 3 in the new chassis (T388) assem-
bly. (Refer to item 3 of Section 1-4-1.)
6. Install the chassis (T388) assembly by reversing steps
1 to 3 of removal.
Precision
P2 x 3
SERVO board
Solders
Blue
Black
Red
Chassis (T388) assembly
Precision
P2 x 3
Claw
CDP-D12