1-2. Main Parts and Circuit Boards
Layouts
SERVO board
LIMIT SW board
SENSOR board
LOAD SW
board
AC/SW
board
EJECT
board
DISPLAY board
1-4
POWER board
CD mechanism deck
MAIN board
HP board
1-3. Removing the Cabinet
n
Before starting the parts replacement, turn off the power
and disconnect the plug from the outlet.
1-3-1. Cover
1. Remove the eight screws (BVTT3 x 8) and remove
the rack mount bracket.
2. Remove the four screws (case) (M3 x 8), remove the
three step tapping screws (M3 x 8), and remove the
cover in the direction of the arrow.
BVTT3 x 8
Rack mount bracket
Step
tapping screws
Screws (case)
(M3 x 8)
Cover
Step
tapping screw
Screws (case)
(M3 x 8)
BVTT3 x 8
Rack mount bracket
CDP-D12