Related Manuals for Team Electronic PT-3508 (3)
Summary of Contents for Team Electronic PT-3508 (3)
- Page 1 TEAM PT-3508 (3) PMR-446 & optional programmierbares Amateurfunkgerät 430 - 440 MHz PMR-446 & optional programmable HAM-Radio 430 - 440 MHz Bedienungsanleitung Manual electronic...
-
Page 2: Table Of Contents
TEAM PT-3508 (3) Set-Up of the TEAM PT-3508 (3) ENGLISH ENGLISH manual Unpack the PT-3508 (3) carefully. Make sure that none of the following items is missing. Should table of contents any item be defective or missing, please contact your dealer immediately. page 1 pcs. -
Page 3: Turning On/Off Your Radio
ENGLISH ENGLISH Operation of the PT-3508 (3) with the Basic Functions The squelch level can be adjusted, i.e. the minimum strength of an incoming signal to dis- able the squelch can be set manually at the PT-3508 (3) or remotely via the software T-UP2. 1) Turning ON/OFF Your Radio Beside the squelch, there are other muting functions available. -
Page 4: Energy Saving Function
ENGLISH ENGLISH Muting Functions of the TEAM PT-3508 (3) 9) Energy Saving Function When the Energy Saving Function is activated, the unit will switch to standby mode if no sig- 1) General nal has been sent or received, and no control has been used for a certain period. In standby Several functions available allow suppressing incoming signals of unwanted stations that mode the power consumption is lowered. -
Page 5: Remarks About The Mute Functions
ENGLISH ENGLISH Upon reception of a station, that uses no or a different selective calling code, no signal is 6) Transmitting with the different Mute Control Functions audible. Only the LED Indicator ( 4 ) will emit a green light to indicate a busy channel. The operation of the PT-3508 (3) will not change when using the mute control functions CTCSS Only one code combination of four short DTMF double tones to be recognized by the selec- or DQT. -
Page 6: Transmission Of A Stored Dtmf String
ENGLISH ENGLISH 10) Transmission of a Stored DTMF String 3) Switch of a Channel’s Transmission and Reception Settings This function can only be used if different frequencies for transmission and reception of a Procedure to transmit a stored DTMF string: channel are set, and/or if the CTCSS / DQT settings for reception and transmission differ. -
Page 7: Time-Out Timer ( Tot)
If the incoming signal uses a DTMF code, it can be transmitted while the channel is busy. modification can cause the withdrawal of your license and the loss of guarantee and repair claims. Should your PT-3508 (3) have a defect, please contact your dealer or TEAM Electronic 8) Transmit Power Switch GmbH directly. -
Page 8: Programmed Channels
ENGLISH ENGLISH 5) Programmed Functions 4) Programmed Channels Note the functions that your dealer has programmed for you Channel Transmitting TX Receiving Bandwidth DTMF Transmission Lock DTMF Mute Control Function DTMF Code Frequency Encoding Frequency Encoding narrow / enabled / on Busy Channels Code-Squelch Selective Calling... - Page 9 8) CTCSS-Töne / CTCSS tones & DQT Codes Code Frequ. (Hz) Code Frequ. (Hz) Code Frequ. (Hz) Code Frequ. (Hz) Code Frequ. (Hz) 67,0 88,5 114,8 151,4 203,5 69,3 91,5 118,8 156,7 210,7 71,9 94,8 123,0 162,2 218,1 74,4 97,4 127,3 167,9 225,7...
- Page 10 TEAM PT3508 (3) for sale and use in : Team Electronic GmbH Bolongarostrasse 88 65929 Frankfurt am Main Tel. 069 - 30 09 50 - 0 Fax 069 - 31 43 82 eMail team-electronic@t-online.de Web Seite www.team-electronic.de electronic...