Table of Contents
Advertisement
BLADE REPLACEMENT
CAUTION
Disconnect the mains and wear protective gloves when you attempt any kind of maintenance to
the blade.
WARNING
When the motor has been switched off, the blade will continue to rotate for several seconds, do
not touch the underside of the machine, until the cutting blade has come to a complete stop.
WARNING
Unbalanced blades will cause the lawnmower to vibrate violently - creating a risk of accident.
Check the blades' condition before each use. Sharpen or replace the blade with a new one when
necessary. It is recommended to have this done by an approved Handy dealer, using
recommended replacement parts.
At the end of the mowing season always re-sharpen the cutting blade or, if required, replace the
blade with a new one.
Always have the cutting blade re-sharpened or replaced by a specialist or one of our authorised
service dealers.
To remove and install the blade, follow the below instructions
1.
Disconnect the lawnmower plug from the electrical mains plug socket.
2.
Wear heavy duty safety gloves, when handling the blade.
3.
Turn the mower over, to reveal the blade & blade housing.
4.
With the other hand, remove the blade securing bolt & washer, using a suitable spanner.
5.
Remove the blade, place the new blade over the central hub and make sure the two small holes
in the blade are located over the lugs on the blade housing.
NOTE: the blade side with stamped text should face outwards.
Advertisement
Table of Contents
