Table of Contents
Advertisement
5. Assemble the other three hooks in the left side: Align the three hooks in this side on the lower
box (5) to the hook holes in the box cover (7), and keep it in the position. As you do this step,
you should make sure that the plastic piece on the lower box is under the cover box (7), and
then keep it in the position. (fig.15 and fig.16)
6. Assemble the other four hooks in the right side as above.
7. Assemble the last hook: Push the flat plate to the hook and make it click into position. (fig. 18)
8. Check the collection box to ensure the box is fitted well, when you do the next step.
9. Lift the grass collector flap of the lawnmower, put the collection box on the hook of mower.
Advertisement
Table of Contents
